usmedianet

BENNING CM 2 Information The BENNING CM 2 is a digital current clamp multimeter that is designed for industrial applications. It features a TRUE RMS measuring method for precise current measurements up to 400 A AC/DC. The CM 2 can also measure voltage up to 600 V AC/DC, resistance up to 40 MOhm, and diodes and continuity. It has a large backlit LCD display and a variety of features to make it easy to use, including a HOLD function, MAX/MIN function, and automatic power-off. The CM 2 is also CAT III 300 V rated for safety. Image

Makita DTD154RTJ Information The Makita DTD154RTJ is a cordless brushless impact driver that is powered by an 18V Li-ion battery. It has a compact and lightweight design, measuring just 117mm long and weighing 1.3kg. The impact driver features a brushless motor that delivers up to 3,600 rpm, 3,800 ipm, and 175Nm of maximum tightening torque. The brushless motor also helps to improve the efficiency and lifespan of the impact driver. The DTD154RTJ has three speed settings (Hard, Medium, and Soft) as well as a "T" mode for self-drilling screws. The speed settings allow you to adjust the power of the impact driver to match the task at hand. The "T" mode reduces the speed of the impact driver when driving self-drilling screws, which helps to prevent the screws from overtightening. The impact driver also features a reversible switch and a LED light. The reversible switch allows you to drive screws in both directions, while the LED light illuminates the work area in low-li...

Hitachi FDV 16VB2 Information The Hitachi FDV16VB2 is a 5-amp hammer drill that offers impact drill or drill-only modes. It has ball and needle bearings for ultimate durability and a low-noise, cooling air-flow design so it won't overheat. The FDV16VB2 features an industrial grade, keyed chuck and a trigger-controlled, variable-speed for 0-2900-RPM. It weighs 3.5 pounds and measures 11-3/8-inches long. The removable side handle with depth gauge improves your accuracy and control when drilling for anchoring. The Hitachi FDV16VB2 comes with a 1-year limited warranty. Here are the full specifications of the Hitachi FDV16VB2: Feature Spec Motor 5 Amps Chuck Size 1/2" (13mm) Max. Drilling Capacity Wood: 35mm Steel: 13mm Concrete: 16mm Impact Rate 0-46,400 BPM Speed 0-2900 RPM Weight 3.5 lbs Length 11-3/8" Here are some of the features of the Hitachi FDV16VB2:

Emos MD-310 Information the information about the Emos MD-310 multimeter: Introduction The Emos MD-310 is an advanced multimeter designed for hobby use. It offers all the standard functions you need for measuring AC and DC voltage, current, and resistance, as well as continuity testing and diode testing. It also features a built-in data recorder that can store up to 1000 measurement results for later analysis.

Makita DDF470RMJ Information The Makita DDF470RMJ is a 14.4V 4.0Ah LXT Lithium-Ion cordless drill driver. It features a brushless motor for increased power and runtime, a 16-position torque setting for precise driving, and a built-in LED light for work in low-light conditions. The DDF470RMJ also comes with a MAKPAC carrying case for easy transport and storage. Specifications

Silverline 304583 Information The Silverline 304583 is a 800W electric sabre saw that is designed for a variety of cutting tasks, including wood, metal, and plastic. It features a powerful motor that can deliver up to 3,000 strokes per minute, as well as a variable speed control that allows you to adjust the cutting speed to suit the material you are working with. The saw also comes with a number of features that make it easy to use, including a built-in laser guide, a dust extraction port, and an adjustable shoe. Introduction The Silverline 304583 is a powerful and versatile sabre saw that is perfect for a variety of cutting tasks. It features a powerful 800W motor that can deliver up to 3,000 strokes per minute, as well as a variable speed control that allows you to adjust the cutting speed to suit the material you are working with. The saw also comes with a number of features that make it easy to use, including a built-in laser guide, a dust extraction port, and an adjustable shoe.

Bosch GWS 9-115 P Professional Information the Bosch GWS 9-115 P Professional information: Intro The Bosch GWS 9-115 P Professional is a powerful and versatile angle grinder that is perfect for a variety of tasks. It features a powerful 900-watt motor that delivers up to 11,500 RPM, making it ideal for cutting, grinding, and polishing. The GWS 9-115 P Professional also features a comfortable grip and a dust extraction system that helps to keep the work area clean.

Stanley SFMEH210 Information Introduction The Stanley FatMax SFMEH210 is a 800-watt hammer drill that is designed for a variety of applications, including drilling holes in concrete, masonry, and wood. It features a 2.4-joule impact energy, which provides enough power to break through tough materials. The drill also has three modes of operation: hammer drilling, chiselling, and rotary drilling. This makes it a versatile tool that can be used for a variety of tasks. Image

Extech 392052 Information the information about the Extech 392052 Flat Surface Stem Dial Thermometer: Introduction The Extech 392052 is a high-precision, flat surface stem dial thermometer that is ideal for measuring temperatures on motors, electrical panels, and other flat surfaces. It features a temperature range of -50°C to 300°C (-58°F to 572°F) with an accuracy of ±2°C (2°F). The thermometer has a large, easy-to-read dial and a stainless steel stem that is 5 inches long. It also features an on/off switch and an auto power-off function after one hour.

Makita TD001GZ Information The Makita TD001GZ is a cordless impact driver that is powered by a 40V Max Li-ion XGT battery. It is designed for heavy-duty continuous tightening and can deliver up to 4,400 impacts per minute (ipm), 3,700 revolutions per minute (rpm), and 220 Newton-meters (Nm) of maximum tightening torque. The TD001GZ is equipped with a 1/4" hex driving shank, a conveniently located forward/reverse rotation switch, and an enhanced anvil holder rigidity. It also features a one-touch speed selector, one-touch bit installation, and a built-in LED light. Image: Specifications:

Black & Decker EPL18K Information the information about the Black & Decker EPL18K lawn mower: Introduction The Black & Decker EPL18K is a cordless electric lawn mower that is perfect for small to medium-sized lawns. It is lightweight and easy to maneuver, making it a great choice for those who have limited mobility. The EPL18K also features a powerful motor that can easily cut through thick grass.

Black & Decker KR70 Information The Black & Decker KR70 is a 710-watt hammer drill that is designed for light- to medium-duty drilling and driving applications. It features a variable speed trigger, a reversible chuck, and a built-in hammer mechanism that provides up to 32,000 impacts per minute. The KR70 also has a built-in work light that helps to illuminate the work area. Image of Black & Decker KR70 hammer drill Specifications

Uni-T UT203 Information The Uni-T UT203 is a digital clamp meter that is designed for measuring AC and DC voltage, current, resistance, frequency, duty cycle, and capacitance. It also features a diode test and a continuity checker. The UT203 is a versatile tool that can be used for a variety of electrical and electronic measurements. Specifications

DeWalt DC840 Information The DeWalt DC840 is a 20V MAX* brushless cordless 1/4 in. impact driver that delivers 1700 in-lbs. of torque and up to 3200 rpm for driving large-diameter screws. It is engineered to be lightweight without sacrificing power, and it features a variable speed trigger for precise control. The DC840 also has a belt clip for easy carrying, and it comes with two 20V MAX* batteries, a charger, and a carrying case. Image of DeWalt DC840 Specifications

Bresser National Geographic Information the information about the Bresser National Geographic telescope: Introduction The Bresser National Geographic telescope is a high-quality telescope that is perfect for beginners and experienced astronomers alike. It is made with high-quality materials and features a number of advanced features that make it easy to use and produce stunning images.

Bosch GSR 18 V-60 C Professional Information The Bosch GSR 18V-60 C Professional is a cordless drill/driver that offers the best power-to-size ratio in Bosch's 18 V category. With 60 Nm of hard torque and a 174-mm head length, the drill driver features an ideal combination of power and size. Specifications Feature Specification Voltage 18 V Max. Torque 60 Nm (hard) Max. Drilling Diameter Wood: 38 mm Steel: 13 mm Masonry: 13 mm Max. Screw Diameter 10 mm Speed 0-500/0-2100 rpm Chuck Size 1/4" (6.35 mm) Weight 1.6 kg Features

Wolfcraft 5027000 Information the information about the Wolfcraft 5027000 drill stand: Intro The Wolfcraft 5027000 is a versatile and sturdy drill stand that is perfect for a variety of woodworking projects. It is made of die-cast aluminum and has a solid cast iron base, making it both lightweight and durable. The drill stand features a rack-and-pinion drive for precise height adjustment, a depth stop with quick adjuster, and a cable holder for keeping your power cord organized. It also comes with a laser guide that helps you to drill accurate and repeatable lines.

Bosch PKS 40 Information The Bosch PKS 40 is a compact and lightweight hand-held circular saw that is designed for making precise, straight cuts in wood and other materials. It features a 40-tooth saw blade that provides a smooth, clean cut, and a CutControl system that helps to ensure that you stay on track when following a marked line. The PKS 40 also has a depth-of-cut adjustment lever that allows you to customize the depth of your cuts, and an angle adjustment lever that lets you make bevel cuts up to 45 degrees. Introduction The Bosch PKS 40 is a great choice for DIYers and professionals who need a reliable and easy-to-use circular saw. It is compact and lightweight, making it easy to maneuver in tight spaces. The CutControl system helps to ensure precise cuts, and the depth-of-cut and angle adjustment levers allow you to customize your cuts to your specific needs.

Makita HR2460 Information The Makita HR2460 is a powerful and versatile rotary hammer drill that is perfect for a variety of applications. It features a 780-watt motor that delivers up to 2.4 joules of impact energy, making it capable of drilling through concrete, brick, and other hard materials. The HR2460 also has a variable speed trigger that allows you to adjust the drilling speed for different materials and applications. Image of Makita HR2460 rotary hammer drill Here is a table of the full specifications of the Makita HR2460:

McCulloch CS 420T Information Introduction The McCulloch CS 420T is a 40cc chainsaw that is ideal for medium-duty tasks around the home and garden. It features an OxyPower engine that delivers more power, lower emissions, and lower fuel consumption. The CS 420T also has a number of other features that make it easy to start and use, including a Soft Start system, a purge bulb, and a combined choke/stop control. Image

Ozito PXCHTK-018 Information the information about the Ozito PXCHTK-018: Intro The Ozito PXCHTK-018 is a cordless hedge trimmer that is ideal for trimming and shaping shrubs and hedges. It is powered by a 20V lithium-ion battery, which provides up to 45 minutes of runtime on a single charge. The hedge trimmer has a cutting length of 550mm and can be adjusted to 90 degrees, making it easy to trim hedges in both horizontal and vertical directions. It also features a dual-handed safety switch that prevents accidental starting, and a blade brake that stops the blades within one second of releasing the trigger.

Wagner W 610 Information The Wagner W 610 is a lightweight and easy-to-use paint sprayer that is ideal for small to medium-sized projects. It is perfect for painting walls, furniture, and other objects both indoors and outdoors. The W 610 features a powerful turbine that delivers a consistent spray pattern, even at high pressure. It also comes with a variety of nozzles that allow you to adjust the spray width and fan pattern to suit your needs. Image Specifications

Black & Decker CD71CRE Information The Black & Decker CD71CRE is a cordless drill that is designed for light-duty tasks around the home. It features a 16V MAX lithium-ion battery that provides up to 1800mah of power, and a 2-speed transmission that allows you to choose the right speed for the job. The drill also has a 13mm chuck that can accommodate a variety of drill bits, and a LED work light that illuminates your work area. Image: Specifications:

Topcraft TBH-1500N Information The Topcraft TBH-1500N is a powerful and versatile drill machine that is perfect for a variety of heavy-duty drilling tasks. It features a 1500W motor that delivers up to 2800 RPMs, making it capable of drilling through wood, steel, and concrete with ease. The TBH-1500N also has a number of other features that make it a great choice for DIYers and professionals alike, including: A reversible chuck that allows for both clockwise and counterclockwise drilling A depth stop for precise drilling A side handle for added comfort and control A soft start function that prevents the drill from stalling when starting up A dust blower that keeps the work area clean Image: Full specifications:

Voltcraft VC650BT Information the information about the Voltcraft VC650BT: Introduction The Voltcraft VC650BT is a digital multimeter that measures a wide range of electrical values, including AC and DC voltage, current, resistance, capacitance, frequency, duty cycle, and temperature. It is a CAT II 600V multimeter, which means that it can be used safely to measure electrical circuits up to 600 volts.

Makita DHS661ZU Information The Makita DHS661ZU is a 18V brushless cordless circular saw that is designed for professional use. It features a compact and lightweight design, making it easy to maneuver in tight spaces. The saw has a maximum cutting depth of 57mm and can be tilted up to 50° for bevel cuts. It is powered by a 18V LXT lithium-ion battery and has a no-load speed of 5,000 RPM. Image of Makita DHS661ZU Specifications

PowerPlus POWXG2030LI Information Introduction The PowerPlus POWXG2030LI is a cordless heggenschaar that is powered by a 18V Li-ion battery. It has a long blade length of 58 cm and can cut branches up to 14 mm thick. The heggenschaar is lightweight at 3 kg, making it easy to use for extended periods of time. It also features a soft grip handle for added comfort. Image

Hitachi CS 30Y Information Intro The Hitachi CS 30Y is a 1.32 kW electric chainsaw that is designed for homeowners and light-duty professionals. It features a 30 cm (12") guide bar and 0.325" pitch chain, making it ideal for cutting firewood, trimming branches, and clearing brush. The CS 30Y is also equipped with a number of safety features, including a chain brake, a kickback limiter, and an automatic oiler. Image

HiKOKI NR1890DC(S) Information the information about the HiKOKI NR1890DC(S) framing nailer: Introduction The HiKOKI NR1890DC(S) is a cordless framing nailer that is designed for professional use. It is powered by an 18V lithium-ion battery and has a maximum driving force of 1,800 Nm. The nailer is also equipped with a brushless motor for increased durability and performance.